Question: What Can You Do With An Old Treadmill?

What kind of motor is in a treadmill?

There are 2 types of treadmill motors: an AC and DC motor.

AC motors are often more powerful than DC ones, but are usually noisier and may require a dedicated power line.

The larger, commercial treadmills are usually designed with AC motors, while home-use machines have DC motors..

How does a treadmill motor work?

It delivers the energy to turn the running belt when you press the start button on the treadmill. Mounted on the shaft inside the motor is an iron core (rotor) and around it are multiple copper wire loops known as windings or the coil. An electrical current is passed through the copper windings of the motor.

How many HP is a treadmill motor?

Most treadmill motors range from 1.5 HP to 3.0 HP with the less expensive treadmills offering lower power motors that simply will not last. Look for at least a 2.0 HP continuous duty motor and this should be adequate. If you run a lot on your treadmill you might want to get a 2.5 HP motor.

How do I know if my treadmill needs lubricant?

How do I know when my treadmill needs to be lubricated? The basic rule to follow is that you should be able to touch your deck surface, under the walking belt and feel a slightly waxy or oily coat of lube on the deck. Check under the area where your feet contact the walking belt.

Will a treadmill damage my floor?

Treadmills are typically heavy. The weight of the machine can make indentations in your carpet or wood floor, and can actually tear vinyl flooring. Add the weight and impact of your running or walking on the machine, and your floor becomes even more susceptible to the damaging effects of pounding.

How many years should a treadmill last?

So how long will a treadmill last? The general consensus is 7 to 12 years with about 10 being the average. This is what the manufacturers say. Of course if you take care of yours it may well last longer.

Should treadmill be on a mat?

The carpet fibers and dust often get into the air when the treadmill is in use, but a treadmill mat can keep them from getting into the motor and other electrical parts. A good treadmill mat will prevent excess dust from building up underneath the treadmill and the motor compartment.

Can you oil a treadmill?

Proper belt lubrication will help keep you treadmill in optimum condition and reduce needed repairs over time. We recommend you lubricate your treadmill once every three month using one ounce of lube per each application.

How long do cheap treadmills last?

On average a treadmill will last about 10 years. With proper care your treadmill may even last longer. The main enemy’s to a treadmills long life are dust and belt friction. This simple, short maintenance program will help keep you treadmill going for many years.

What voltage is a treadmill motor?

Re: Treadmill motors: 12 volt dc? Coincidentally most Treadmills use a 80-260 VDC motor with a suitable HP rating and a PWM motor speed controller to allow the user to change the belt speed and keep a good constant speed and torque while running on it.

Is 2.5 hp good for treadmill?

If you’re planning on using the machine for jogging, a good guideline is to look for a machine with 2.5 hp or more. … If, on the other hand, you intend to use your machine for an intense running session or two, then you’ll want to look for a treadmill that has more than 3.0 hp.

Can a treadmill motor be repaired?

Treadmill motors usually have a plastic fan, which may get broken. That is easy to replace, it is usually fixed in its place by a Seeger ring, or just snap-fit. Other plastic parts may be broken accidentally such as the motor brushes caps.

Can I use wd40 on a treadmill?

Answer: Treadmills require a 100% silicone and this product is mixture. Using the wrong type of oil or lubricant on your treadmill may cause serious damage to the belt, motor and other moving parts. Avoid using household oils and lubricants such as WD-40, silicone spray or oil to lubricate your treadmill.

Should I put a mat under my elliptical?

When an elliptical is in use, it can create a lot of noise and friction, potentially damaging the flooring or the equipment itself. However, placing a rubber elliptical floor mat beneath the machine can quiet it, stabilize it, and prevent damage to extend the life of your expensive workout equipment.

Can you scrap a treadmill?

Stationary bikes or spin bikes can be scrapped for their aluminum and steel content. … The bigger pieces of equipment, like treadmills and elliptical machines, contain valuable metals (steel, copper, aluminum) as well as electrical motors, which are valuable for their metal wiring.

What happens if you don’t lubricate a treadmill?

The reason treadmills need lubrication is to stop the motor overworking, and to keep the belt running smoothly. … Over time, if you don’t lubricate the belt then you will put additional stress on the motor, which can lead to an expensive repair down the line.

Are treadmill motors reversible?

All of the treadmill motors that I have scavenged have been permanent magnet DC motors. These all (as far as I have seen) have two leads. Reversing the leads reverses the motor. Note that these motors must be driven by an appropriate controller (something that generates PWM DC current).